Home  ›  Products

PIPE SUPPORTS · MODULAR SYSTEMS · HEAVY PROFILES · STRUT CHANNEL

MEP Support Systems and Pipe Supports in UAE

Purus Hi-Tech makes pipe supports, modular support systems, heavy duty profiles and strut channel fittings at our factories in Sharjah and Umm Al Quwain, and delivers to all 7 emirates.

4

Product categories

2

UAE factories

Since 2012

Making MEP supports

7 Emirates

Delivery across the UAE

WHAT WE MAKE

Our MEP Support System Product Lines

Four product lines that carry pipes, ducts and cable trays, all made in our own facilities by the same team.

Pipe supports holding pipes on threaded rod hangers below a concrete slab

Pipe Support System

Clamps, hangers, saddles, shoes, guides and brackets for plumbing, HVAC, fire-fighting and process piping.

Modular strut support frames carrying pipes and cable trays in a UAE plant

Modular Support System

Bolted trapeze, wall and floor frames for pipes, ducts and cable trays. No welding on site.

Steel cross plate connector bolted at a support frame joint

Custom MEP Fabrication & Heavy Profiles

Equipment bases, pipe racks, platforms and heavy brackets, with plate up to 40 mm, made to your drawing.

Strut channel frame with a cantilever bracket and channel connectors fixed to a wall and steel beam

Channels & Fittings

Single and back-to-back strut channels, 1.5 to 2.5 mm, in GI, MS, HDG and stainless steel.

WHICH CATEGORY DO YOU NEED?

Find the Right Support for Your Project

Holding pipes

Clamps, hangers, U-bolts and saddles for water, firefighting, drainage, HVAC and process pipes.

Pipe Support System →

Building bolted frames

Base plates and fittings that join 41 mm strut channel into frames with no welding.

Modular Support System →

Carrying heavy loads

Heavy duty profiles, base plates and connectors for equipment support and heavy MEP frameworks.

Custom MEP Fabrication & Heavy Profiles →

Channel and fittings

Slotted channel in 3 m and 6 m lengths with the plates and supports that connect it.

Channels & Fittings →

BUILT TO YOUR SPECIFICATION

Materials and Finishes

Material

Carbon Steel

ASTM A36/A36M

Used for heavy-duty profiles, support brackets, base plates, clamps and structural fixing components.

Material

Stainless Steel (SS316)

ASTM A240/A240M

High-quality SS316 for enhanced corrosion resistance, reliable performance and long-lasting durability.

Finish

Electro-Galvanized

ASTM B633

An electro-deposited zinc coating for corrosion resistance, an even surface and durability.

Finish

Hot-Dip Galvanized

ASTM A123/A123M

Excellent corrosion resistance and long-term protection for structural and industrial applications.

Finish

Epoxy

Protective coating

A tough layer that resists corrosion, moisture and chemicals, for industrial environments and equipment supports.

APPLICATIONS

Where Our Products Are Used

Water Supply

Riser clamps and U-straps for water supply lines and vertical risers.

Firefighting & Sprinklers

Riser clamps for firefighting risers and U-straps for fire sprinkler pipes.

HVAC & Chilled Water

Riser clamps, U-straps and heavy duty profiles for HVAC piping and chilled water risers.

Drainage & Gravity Lines

Riser clamps for drainage and sewer stacks, and adjustable saddle clamps for gravity flow piping.

Cable Trays & Conduit

Heavy duty profiles and 4W-U wing connectors for cable tray supports, and U-straps for electrical conduit.

Facade & Stone Cladding

Heavy duty profiles for stone cladding and facade fixing frames.

Floor, Wall & Ceiling Mounting

Base plates and heavy base plates for floor, wall and structural mounting.

Industrial & Equipment Support

Heavy duty profiles, cantilever supports and riser clamps for industrial piping and equipment.

Need a Size or Finish Not Listed?

Send your drawing and we will make it to your specification in our own factories.

FAQ

Product FAQ

What products does Purus Hi-Tech make?

We make products in 4 categories: Pipe Support System (clevis hangers, U-straps, riser, swivel, spiral duct and beam clamps, U-bolts and adjustable saddle clamps), Modular Support System and Channels & Fittings (slotted channel, base plates, U supports, wing supports, angle corner supports and 3 hole half tee plates), and Custom MEP Fabrication & Heavy Profiles (heavy duty profiles, heavy base plates, cantilever supports, corner angles, cross plates, angle fittings and 3W and 4W-U connectors).

Which materials and finishes are available?

Carbon steel to ASTM A36/A36M and stainless steel SS316 to ASTM A240/A240M. Finishes are electro-galvanized to ASTM B633, hot-dip galvanized to ASTM A123/A123M and epoxy coating. The finish options for each product are listed on its page.

Which MSS SP-58 types do your pipe supports follow?

Our clevis hanger follows MSS SP-58 Type 1, the riser clamp MSS SP-58-2002 Type 8, the U-bolt MSS SP-58-2002 Type 24 and the U-strap MSS SP-58 Type 26. The spiral duct clamp also complies with MSS SP-58.

What channel size do your modular fittings fit?

Our base plates, U supports, wing supports, angle corner supports and 3 hole half tee plates fit standard 41 mm strut channel systems. Slotted channel is supplied in standard 3 m and 6 m lengths.

Can you make custom sizes?

Yes. Send us your drawing with the sizes, quantities and finish you need, and we will make the parts to your specification.

Do you install the supports on site?

No. We manufacture and supply. For modular support systems, our team supervises the installation on site so the frames are assembled correctly.

LET’S WORK TOGETHER

Get a Quote for MEP Supports

Send your BOQ or drawing with sizes, quantities and finish, and our team will send you a quote.

✓   Made in our own factories in Sharjah and Umm Al Quwain

✓   Custom sizes and finishes made to your drawing

✓   We deliver to all 7 emirates of the UAE

✓   Bulk and project orders welcome

    Request a Quote

    Drop PDF, DWG, DXF or Excel file here, or click to upload