Since 2012 · Made in the UAE
MEP Support Systems & Steel Structure Manufacturer in UAE
Purus Hi-Tech manufactures MEP support systems, pipe hangers, clamps and structural steel for construction projects across the UAE. Everything is made in our own factories in Sharjah and Umm Al Quwain, and we deliver to project sites in all 7 emirates, from Abu Dhabi and Dubai to Ras Al Khaimah and Fujairah.
14 Years
Manufacturing since 2012
250+ Tons
Fabrication per month
UAE
Manufacturing in our own factories
7 Emirates
Delivery across the UAE
Engineering Excellence You Can Trust
Why Contractors Choose Purus Hi-Tech
A direct OEM manufacturer of pipe supports and fixing systems, not a reseller.
OEM Manufacturer Since 2012
14 years making pipe supports, clamps, hangers and fixing systems for MEP contractors.
Made in the UAE
Products made in our own factories in Sharjah and Umm Al Quwain, delivered to every emirate.
Checked Before Dispatch
Every part is measured and checked before it leaves our factory.
Completely Customizable
Custom sizes, finishes and brackets made to your drawing for each project.

We Are Purus Hi-Tech
A UAE MEP Support Manufacturer Since 2012
Purus Hi-Tech is an MEP support manufacturer in the UAE. Since 2012 we have supplied pipe supports, hangers, clamps and modular support frames to contractors on industrial, commercial, infrastructure and oil & gas projects.
We run our own factories in Al Jlail, Industrial Oasis, Sharjah and the Emirates Industrial Area, Umm Al Quwain, so we control quality, lead time and delivery on every order.
Manufacture and supply. We make and deliver your MEP support products. For modular support systems, our team supervises installation on site. Structural steel is fabricated and erected by our own crews.
14
Years in business (since 2012)
250+
Tons fabricated per month
40 mm
Maximum cutting thickness
25k+
Sq. ft workshop
Engineered For Excellence
Structural Steel Fabrication and Aluminium Services in the UAE
Every service has its own page with specs, FAQs and a quote form.

Beams, columns and trusses for industrial and commercial projects, fabricated and erected by our team.
250+ tons per month

Precision cutting of mild steel, stainless steel and aluminium, with clean edges and minimal waste.
12 kW · 8000 x 2500 mm bed · up to 40 mm · 0.1 mm tolerance

Programmed bends that repeat the same radius on every part, for handrails, process and utility lines.
Pipe and tube bending

Brackets, frames and custom MEP supports made to your drawing.
Made to drawing

Sample parts made on our production equipment, so you can check fit and function before full production.
Prototype first, then full production

Paint and powder coating for steel and aluminium parts, applied in a dust-free area.
Paint · powder coating

L, T, box and flat-bar profiles cut, punched and threaded for facades, cladding and framing.
Grades 6060 and 6063
What We Make
Our MEP Support System Product Lines
Four product lines that carry pipes, ducts and cable trays, all made in our own facilities by the same team.

Clamps, hangers, saddles, shoes, guides and brackets for plumbing, HVAC, fire-fighting and process piping.

Bolted trapeze, wall and floor frames for pipes, ducts and cable trays. No welding on site.

Equipment bases, pipe racks, platforms and heavy brackets, with plate up to 40 mm, made to your drawing.

Single and back-to-back strut channels, 1.5 to 2.5 mm, in GI, MS, HDG and stainless steel.
Made in Our Own Factories
Popular Products
Pipe supports and channel system parts in carbon steel, mild steel and stainless steel, finished to your project specification. Bulk orders welcome.

High-strength support channel for structural framing, equipment supports, MEP frameworks, cable tray supports and facade fixing.
Carbon steel or stainless steel · multiple sizes
Finishes: Electro-galvanized · Hot-dip galvanized · Stainless steel (SS-316)
View product →

Creates a strong, stable foundation for channel support systems, with even load spread on floor, wall and ceiling fixings.
Carbon steel or stainless steel · multiple sizes
Finishes: Electro-galvanized · Hot-dip galvanized · Stainless steel (SS-316)
View product →

Two-point bolt-fix strap for plain and insulated pipes in HVAC, water supply, fire sprinkler, conduit and industrial piping.
Mild steel · MSS SP-58 Type 26
Finishes: Electro-galvanized · Hot-dip galvanized · Stainless steel (SS-316)
View product →

Holds vertical pipe runs firmly and spreads the load, for water supply, firefighting risers, drainage stacks and HVAC risers.
Carbon steel · MSS SP-58 Type 8
Finishes: Electro-galvanized · Hot-dip galvanized · Stainless steel (SS-316)
View product →
Download the Purus Hi-Tech Brochure
Our products, capabilities and manufacturing, in one PDF.
Supporting Diverse Industries
Industries We Serve Across the UAE
Pipe supports, guides, anchors and bent pipe for process and utility lines.
Structural steel and MEP supports for factories and process plants.
Hangers, clamps and modular frames for HVAC, plumbing and firefighting.
Fabricated steel and support systems for large public works.
Track Record
MEP Supports and Steel Delivered on UAE Projects

Industrial Warehouse Steel Structure
Dubai
Industrial
Structural steel

Commercial Tower MEP Supports
Abu Dhabi
Commercial
Pipe hangers + clamps

Process Plant Modular Frames
Sharjah
Industrial plant
Modular system
Coverage
Delivery to All 7 Emirates of the UAE
From our factories in Sharjah and Umm Al Quwain we supply MEP supports and fabricated steel to construction and industrial sites in every emirate, from Abu Dhabi and Dubai to Ras Al Khaimah and Fujairah.
Abu Dhabi
Dubai
Sharjah
Ajman
Umm Al Quwain
Ras Al Khaimah
Fujairah
Sharjah Factory
Al Jlail, Industrial Oasis, Sharjah, UAE
Umm Al Quwain Factory
Emirates Industrial Area, Umm Al Quwain, UAE
Dubai, UAE
Supply and delivery across Dubai
FAQ
Frequently Asked Questions
What does Purus Hi-Tech manufacture?
We manufacture MEP support systems: heavy duty profiles and base plates, riser clamps, U-straps, U-bolts, pipe hangers and clamps, modular support frames, strut channel, cable tray supports and HVAC duct supports. We also offer structural steel fabrication, CNC laser and plasma cutting, CNC pipe bending, sheet metal work, aluminium profile fabrication and paint or powder coating.
Do you install MEP supports on site?
No. Purus Hi-Tech manufactures and supplies MEP support products. For modular support systems, our team supervises the installation on site so the frames are assembled correctly.
Which emirates do you deliver to?
We deliver to all 7 emirates: Abu Dhabi, Dubai, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah.
Where are your products manufactured?
Our products are made in the UAE, at our own factories in Sharjah and Umm Al Quwain.
What thickness and finishes does your strut channel come in?
Our strut channel comes in 1.5 to 2.5 mm thickness, in GI, MS, HDG and stainless steel finishes, with matching accessories.
How do I get a quote?
Send your drawing or BOQ through the quote form below, or message us on WhatsApp at +971 52 735 1332. Our team will review it and send you a quote.
Let’s Work Together
Get a Quote for MEP Supports or Steel Fabrication
Send your drawing or BOQ and our team will review it and send you a quote.
✓Direct OEM pricing from our own factories
✓Custom sizes and finishes made to your drawing
✓We deliver to all 7 emirates of the UAE
✓Bulk and project orders welcome
Insights
Guides for UAE Contractors



